#1. “Therm-Flash” - Butyl Base Flexible Flashing Window Installation & Flashing Details (Step by Step)
1. Windows 1.01 –		CAD-DWG
2. Windows 1.02 –
3. Windows 1.03 -
4. Windows 1.04 -
5. Windows 1.05 -
6. Windows 1.06 -
7. Windows 1.07 -
8. Windows 1.08 –
9. Windows 1.09 -
10. Windows 1.10 –
#2. WaterWay RainScreen Drainage Mats (Cavity Construction)
A. Lap Siding Assembly with Drainage CA 1.0		CAD-DWG
B. WaterWay Drainable Stucco Assembly CA 1.0 (See Section #3 Below)		CAD-DWG
C. Manufactured Stone with Drainage CA 1.0		CAD-DWG
1. Termination at Foundation 1.1		CAD-DWG
2. Ledger Detail 1.1		CAD-DWG
D. General Details:
1. Cap Flashing 3.01		CAD-DWG
2. Soffit / Fascia 1.0		CAD-DWG
3. Plate Line Flashing		CAD-DWG
4. Deck Flashing 4.0		CAD-DWG
5. Saddle Flashing 3.02		CAD-DWG
6. Inside Corner 1.0		CAD-DWG
7. Outside Corner 2.0		CAD-DWG
8. Window Head Flashing 1.0		CAD-DWG
9. Non-Flanged Window – Jamb 2.01		CAD-DWG
10. Non-Flanged Window – Head 2.02		CAD-DWG
11. Non-Flanged Window – Sill 2.03		CAD-DWG
12. Termination at Concrete Foundation 1.1		CAD-DWG
#3. WaterWay Drainable Stucco Assembly (Rainscreen)
A. Component Assembly WDSA 1.0		CAD-DWG
B. General Details
1. Roof to Wall Kick-Out Flashing WDSA 2.0		CAD-DWG
2. Cap Flashing 3.01		CAD-DWG
3. Soffit / Fascia 1.0		CAD-DWG
4. Expansion Joint 2.0		CAD-DWG
5. Window Head Flashing 1.0		CAD-DWG
6. Store Front Window 2.01 (jamb)		CAD-DWG
7. Store Front Window 2.02 (head & sill)		CAD-DWG
8. Inside Corner 1.0		CAD-DWG
9. Outside Corner 2.0		CAD-DWG
10. Saddle Flashing 3.02		CAD-DWG
11. Deck Flashing 4.0		CAD-DWG
12. Termination at Concrete Foundation 1.1		CAD-DWG
13. Termination at Concrete Foundation 1.2		CAD-DWG

Details provided are not a directive of Stuc-O-Flex International, Inc. but rather offered for review and consideration by the architect, engineer, or designer for project specific modifications. Drawings are considered general guidance information only and should be reviewed by the project design professional, at their sole discretion, and revised accordingly to best reflect project specific conditions. Stuc-O-Flex International, Inc. accepts no responsibility and disclaims any and all liability for the use of these details.