EUROPLAST AND EUROSEAL
EUROPLAST
Description:
Europlast is a pre-colored, wet-mix 100% Acrylic polymer based interior & exterior coating system that transforms vertical walls into a classic example of old world Venetian style plaster. This versatile decorative coating exhibits a rich aesthetic appearance with unlimited color and texture opportunities. Achieve a wide range of effects from Rustic plaster to smooth polished limestone.
Note: Europlast surfaces must receive a coat of Euroseal either clear or tinted after curing. See Euroseal data sheet.
Color:
20 standard colors, see color chart for specifics. Special colors available upon request, virtually no limit to selection of shades.
Use:
Europlast is a decorative finish providing color, texture and a weathering surface in a trowel applied coating. Applications over interior and exterior wall surfaces including stucco, one coat stucco, brick, block, plaster, cementitous sheathings, and water management EIFS, even primed drywall for interior applications. Various other substrates may be applicable, contact technical department @ 1-800-305-1045 for specific details.
Application:
Europlast is normally applied with ordinary stainless steel masonry trowels. It can also be spray applied with proper equipment onto the substrate, then troweled to desired texture.
Europlast Product Data Sheet
EUROSEAL
Description:
Euroseal is a 100% Acrylic Polymer Sealer that is applied over Europlast finish. Euroseal can also be applied to Cement stuccos, cementitous products, Brick, Block, Stone, and Acrylic finishes to provide an “antique” or weathered appearance. It is highly resistant to moisture and helps to shed water in vertical wall applications while minimizing challenges associated with efflorescence and dirt pick-up.
Color:
Euroseal is available in clear and an unlimited selection of semi-transparent colors, the material can provide a high level of gloss or flat appearance depending on client requirements . The Euroseal colors are available in both pre-tinted containers and pre-packaged color bottles for addition at the project site. This product is intended to create an old world or weathered look while adding a striking characteristic to completed walls.
Use:
Euroseal has a unique ability to transform a standard wall finish into a classic example of centuries old plaster. This semi-transparent sealer is formulated to obtain an uneven antiqued or “mottled” appearance on Europlast finish. Euroseal also provides a highly water- resistant surface that helps reduce dirt pick-up and control efflorescence. Euroseal may also be applied to properly cured Cement stucco, One-coat stucco, Brick, Block, Stone, even painted textured surfaces.
Euroseal Product Data Sheet
EUROPLAST SAMPLES
|
More Pictures
1
2
|
