Maintenance & Care

Cleaning & Maintenance

Name: Stuc-O-Flex International - Eastern Division
Address: 1605 Prosser Road, Knoxville, TN, 37914, US
Telephone: 800-305-1045

Stuc-O-Flex exterior wall coatings require little maintenance. Below is an overview regarding care and cleaning of your wall finish.

Quick Links

Annual Inspection

On an annual basis, review and observe that all caulking details and flashings are in working order, and any penetrations that exist in the Stuc-O-Flex are rectified immediately to safeguard against water intrusion behind the finish.

Damage Repair

Any damage or holes in the system should be repaired as soon as possible. Contact the original contractor who installed the Stuc-O-Flex or call for assistance on details to perform the repair at 1-800-305-1045.

Spot Cleaning

Cleaning of the Stuc-O-Flex should not be required normally for many years. If dirt is concentrated in an area (i.e. down spouts, scuppers, parapet caps, etc.), this can be removed with hot water, soap, and a stiff nylon bristled brush (not metal) in most cases. Specialty cleaners are available from Stuc-O-Flex International for extreme cases.

Full Wall Cleaning

If the building becomes generally dirty after years of exposure, the entire wall can be cleaned with T.S.P. or other types of cleaners. This cleaning should only be performed by a qualified contractor with knowledge of both the Stuc-O-Flex and power washing equipment. Do not exceed 600 PSI.

Mold & Mildew Treatment

Stuc-O-Flex will not support mold and mildew growth in the coating itself. However, in high-humidity areas, organic dirt may cause mold growth (generally on north-facing walls). Apply a bleach and water solution (1:1 ratio), soak for five minutes, scrub with a stiff bristled brush, then thoroughly rinse with clean water.

Color Change

If you would like to change the color of your Stuc-O-Flex, you may paint the surface with an Exterior Acrylic Latex Paint or Stuc-O-Flex “RENEW” following the instructions provided by the manufacturer.

These above referenced topics should cover the vast majority of issues dealing with the care of our Stuc-O-Flex coating. We welcome the opportunity to support your projects and are available at 1-800-305-1045 if any clarification or assistance can be provided by Stuc-O-Flex International, Inc.

Technical Support

Installation & Technical Support for Residential Projects

Proper installation is essential to system performance and longevity. Stuc-O-Flex provides technical support to assist builders and installers throughout residential projects.

Application Guidelines

Detailed application guidelines and best practices for proper installation techniques.

Assembly Recommendations

Assembly-specific recommendations tailored to your residential project type and requirements.

Jobsite Support

Technical service support for jobsite questions, troubleshooting, and inspections.

Need technical assistance?

[email protected]

Get In Touch

Talk With a Stuc-O-Flex Specialist

Whether you’re designing, building, or renovating a residential project, our team can help you select the appropriate Stuc-O-Flex system.

Call Us

1-800-305-1045

Office & Will Call Hours: Monday – Friday: 7:00 AM – 5:00 PM

Material Mixing / Production Cutoff Last mix orders accepted by 4:00 PM

Email Us

General & Order Inquiries:

[email protected]

Technical Support:

[email protected]

Offices

Corporate Office

15459 NE 95th St.
Redmond, WA 98052

(425) 885-5085

Eastern Division

1605 Prosser Road
Knoxville, TN 37914

1-800-305-1045